Breaking Out the Rotary Stability Screen
With our next breakout we are moving on the Stability Pod with the Rotary Stability Screen. I’ve definitely seen this screen scored incorrectly quite a bit, so even if you are not new to the FMS I highly recommend clicking the link below to watch a quick video on performing and scoring the Rotary Stability Screen.
So why do we use the rotary stability screen anyway? Why should you care if your client can do a bird dog over a board?
The rotary stability screen is the first of two screens in the FMS that check core function. We use the rotary stability screen to check “inner core” or “soft core” function and we use the trunk stability push up to check “outer core” or “hard core” function. The inner core is more of the reflexive core that requires subconscious timing and is the core that is rarely specifically trained in the gym. You can’t train your inner core with sit-ups, crunches, or planks. It needs to be reflexive and subtle.
So what do we do when someone scores a 1 on the Rotary Stability Screen on the FMS? What are we looking for? How should we break it out?
One thing to keep in mind when someone scores a 1 on the Rotary Stability is the FMS Hierarchy. It is important to note that if someone has a 1 on the Active Straight Leg Raise or the Shoulder Mobility screens, you are in the wrong place trying to work on the Rotary Stability screen. We want to get the mobility issues off of the table before working on this pattern so make sure that is the case before proceeding. So technically, the first two breakouts for the Rotary Stability screen are the Active Straight Leg Raise and the Shoulder Mobility screen on the FMS. The only mobility issues that should affect the Rotary Stability screen are:
The ability to extend the hip: This is covered in ASLR
The ability to flex the shoulder: This is covered in SM
The ability to touch the elbow to the knee: This should be covered if you have 2’s on both the ASLR and SM. If they have the mobility to pass the ASLR and they have the mobility to pass the SM but can’t touch the knee to the elbow in quadruped its most likely not a mobility issue, chances are it’s a stability issue, and we would be in the perfect place to start correcting the core. Sometimes it’s possible that the stomach is too large to touch the knee to the elbow as well, but this should be very rare.
So we should be in a place at this point where mobility is not an issue and we are deciding how to correct the Rotary Stability dysfunction. From here I will look at a few things
Depending if the breathing needs work I will give them breathing exercises in the position that they are struggling with. You can see examples of those breathing corrections below in the breathing track.
From there I will look at their rolling patterns. I want to look at all four rolls to see what they can and can’t do and in the also determine which roll needs the most work.
So here’s how it all works. If they can’t breath they go to the breathing track. If they can’t roll we go to the rolling track, and if they can roll perfectly in all patterns they go to the quadruped track.
Bubblegum Farts (Stability Ball Rockback)
Bird Dog Arms
Bird Dog Legs
Bird Dog Hold
Once we get the pattern corrected and have symmetrical 2’s on the Rotary Stability Screen you want to incorporate that stability in some functional patterns such as:
One Leg Elevated Push Up (one leg elevated, one leg on floor)
½ Kneeling Chops and Lifts
Offset Deadlifts, Squats, and Carries
This is the strategy I use to dig deeper into Rotary Stability 1’s and get people’s cores working in synergy with their extremities. I hope this gives you a better understanding of the Rotary Stability Screen and what to do when someone has dysfunction in that pattern.